TMF Management Programming Manual (G06.26+)

HP NonStop TMF Management Programming Manual—522420-003
A-1
A
TMF Configuration Limits and
Defaults
The tables in this appendix summarize various limits and defaults for TMF.
The following types of limits and defaults are included:
Caution. Some limits and defaults described in this appendix may have changed since this
manual was published with RVU G06.26. If such changes were made, they are described in
TMF Supplement for Limits and Defaults Changed After RVU G06.26. If that Supplement
currently exists, please read it for new information about limits and defaults.
Topic Page
TMF Global Limits and Defaults A-1
Audit Trail Limits and Defaults A-2
Transaction Limits and Defaults A-2
Audit Dump and Online Dump Limits and Defaults A-3
Resource Manager Limits and Defaults A-3
Process Limits and Defaults
A-3
Default Program File Names for Processes A-5
Table A-1. TMF Global Limits and Defaults
Parameter Limits Default
Autoabort threshold 20 through 21474836
seconds (about 8 months)
2 hours
Master audit trail capacity used by a
transaction before it is automatically
aborted
Always 45% 45%
TMFLIB memory threshold 1 through 100% Disable at 90%
Reenable at 85%
TMP extended memory threshold 1 through 100% Disable at 95%
Reenable at 90%