TMF Management Programming Manual (G06.26+)

TMF Configuration Limits and Defaults
HP NonStop TMF Management Programming Manual—522420-003
A-3
Table A-4. Audit Dump and Online Dump Limits and Defaults
Parameter Limits Default
Number of parallel audit dump copies 1 through 2 1
Number of serial audit dump copies 1 through 3 1
Number of disk volumes that can be
added to an audit dump configuration
when audit dumping is directed to disk
media
1 through 16 None
Number of tape or disk volumes in a
DUMP FILES command
1 through 16 None
Table A-5. Resource Manager Limits and Defaults
Parameter Limits Default
Resource manager name Maximum length: 128
characters
None
Maximum number of registered
recoverable resource managers for each
node
16 through 16384
(must be a multiple of 16)
256
Maximum number of open resource
managers for each processor
16 through 1024
(must be a multiple of 16)
128
Maximum number of concurrently
pushed (exported) or pulled (imported)
transaction branches for each resource
manager
16 through 1024
(must be a multiple of 16)
128
Table A-6. Process Limits and Defaults (page 1 of 3)
Parameter Limits Default
Audit dump process type
Number of processes 1 for each audit trail as
needed
0 if not needed; 1 per
audit trail as needed
Extended segment size 0.5 through 128 MB
(127.5 MB actual)
0.5 MB
Audit overflow process type
Number of processes 1 for each audit trail as
needed
0 if not needed; 1 per
audit trail as needed
Extended segment size 0.5 through 128 MB
(127.5 MB actual)
0.5 MB