TMF Operations and Recovery Guide (G06.26+)

Overview of TMF Maintenance and Recovery
HP NonStop TMF Operations and Recovery Guide—522417-003
1-7
Displaying Configuration Attributes
RMOpenPerCpu 32
BranchesPerRM 128
Table 1-4 describes the information in the INFO TMF display. For detailed information
about TMF configuration attributes, see the TMF Reference Manual.
Note. The GoRemote, PioBuffer, and TransactionProtocol items can appear in this display
only if your system is running the HP NonStop
™ Remote Database Facility subsystem that
guarantees Zero Lost Transactions (RDF/ZLT). For more details about these items, see the
discussions of the ALTER AUDITTRAIL, INFO AUDITTRAIL, and INFO TMF commands in the
TMF Reference Manual.
Table 1-4. Understanding the INFO TMF Display (page1of3)
Heading/Attribute Meaning
Configuration Volume The volume that contains the TMF configuration files that
TMF uses at startup.
Audit-Trail Format The audit trail format: 1 for format 1 audit trails, or 2 for
format 2 audit trails.
GoRemote The GOREMOTE setting, which specifies whether the PIO
mechanism or the Message System is used to send
GoRemote messages to the TMP.
PioBuffer The PIOBUFFER settings, which establish the transport
buffer configuration.
TransactionProtocol The TRANSACTIONPROTOCOL setting, which determines
the protocol used to flush transactions upon their
completion.
Audit-Trail Configuration
{ Master | Auxiliary01…15 } The audit trail for which information is displayed.
ActiveVols The active-audit volume names, as specified in an ADD or
ALTER AUDITTRAIL command.
Subvolume ZTMFAT All audit-trail files reside on the ZTMFAT subvolume.
Prefix { AA…PP } The audit-trail file ID prefix, which TMF assigns during
configuration. All file IDs in this audit trail have the prefix
shown here, followed by a six-digit sequence number, which
TMF also assigns.
filesize The size, in megabytes, of the files in this audit trail, as
specified in an ADD AUDITTRAIL command.
filespervolume The number of audit-trail files that reside on each active-
audit volume configured for this audit trail, as specified in an
ADD or ALTER AUDITTRAIL command.
auditdump on | off Whether an audit dump process has been configured for
this audit trail, as specified in an ADD or ALTER
AUDITTRAIL command.