TMF Reference Manual (G06.24+)

TMFCOM Commands

HP NonStop TMF Reference Manual—522418-002

3-122

DISPLAY OPERATIONS

year

is a four-digit integer for the calendar year.

is an integer for the hour, from 0 through 23.

min

is an integer for the minute, from 00 through 59.

sec

is an integer for the second, from 00 through 59.

GMT

indicates that the BEGINTIME value is specified in Greenwich mean time. If GMT

is omitted, the default is the local time at your site.

LOGFILE filename

identifies the EMS log file on which all EMS messages are recorded, entered in the

following format:

[volume.][subvolume.]file-id

The default is the current EMS log file for TMF, used by the standard EMS collector

process (named $0).

COLLECTOR process-name

specifies the process name of the EMS collector that is the source of the EMS

messages. The default is the standard EMS collector process (named $0).

Security Restrictions

You can issue the DISPLAY OPERATIONS command only if you have read-access to

the EMS log files.

TMF State Requirement

You can enter the DISPLAY OPERATIONS command at any time, whether or not TMF

has been started.

Note. You can use either dashes (-) or spaces, or both, as delimiters to separate the

month, day, and year values from one another, but you must use at least one of these

delimiters.

Note. You can specify either the LOGFILE or the COLLECTOR option, but not both.