TMF Reference Manual (G06.24+)

TMFCOM Commands
HP NonStop TMF Reference Manual—522418-002
3-150
INFO AUDITDUMP
INFO AUDITDUMP
The INFO AUDITDUMP command displays the configured attribute values of audit
dump processes.
MASTER | MAT
AUX[ILIARY]nn
specifies the audit trail associated with the audit dump process whose attributes
are to be displayed, thus identifying that process. MASTER or MAT specifies the
master audit trail. AUXILIARYnn or AUXnn specifies an auxiliary audit trail. nn is
a two-digit number ranging from 01 through 15 that specifies one of the 15
potential auxiliary audit trails in the configuration. (When the value of nn is 09 or
less, you must specify the leading zero.)
*
displays information for all audit dump processes. If you do not specify an audit
trail, this is the default.
OBEYFORM
formats INFO AUDITDUMP output as command file text that can be executed by
TMFCOM. TMF saves this output in the file designated by the OUT option
available with all commands. Subsequently executing this command file produces
a new audit dump configuration that exactly matches the existing configuration.
OUT option use and command file execution are described in Directing Output to
an Alternate Destination on page 2-8.
Security Restrictions
Anyone can enter the INFO AUDITDUMP command.
TMF State Requirement
You can enter the INFO AUDITDUMP command at any time, whether or not TMF has
been started.
INFO AUDITDUMP [MASTER | MAT ]
[AUX[ILIARY]nn ]
[(MASTER | MAT [,AUX[ILIARY]nn ])]
[(AUX[ILIARY]nn [,MASTER | MAT ])]
[(AUX[ILIARY]nn [,AUX[ILIARY]nn])]
[ * ]
[,OBEYFORM]