TMF Reference Manual (G06.24+)

TMFCOM Commands

HP NonStop TMF Reference Manual—522418-002

3-152

INFO AUDITTRAIL

The INFO AUDITTRAIL command displays the configured attribute values of audit

trails.

MASTER | MAT

AUX[ILIARY]nn

identifies the audit trail for which attributes are to be displayed. MASTER or MAT

specifies the master audit trail. AUXILIARYnn or AUXnn specifies an auxiliary

audit trail. nn is a two-digit number ranging from 01 through 15 that specifies one

of the 15 potential auxiliary audit trails in the configuration. (When the value of nn

is 09 or less, you must specify the leading zero.)

displays information for all audit trails. If you do not specify an audit trail, this is the

default.

OBEYFORM

formats INFO AUDITTRAIL output as command file text that can be executed by

TMFCOM. TMF saves this output in the file designated by the OUT option

available with all commands. Subsequently executing this command file produces

a new audit trail configuration that exactly matches the existing configuration. OUT

option use and command file execution are described in Directing Output to an

Alternate Destination on page 2-8.

Security Restrictions

Anyone can enter the INFO AUDITTRAIL command.

TMF State Requirement

You can enter the INFO AUDITTRAIL command at any time, whether or not TMF has

been started.

INFO AUDITTRAIL [MASTER | MAT ]

[AUX[ILIARY]nn ]

[(MASTER | MAT [,AUX[ILIARY]nn ])]

[(AUX[ILIARY]nn [,MASTER | MAT ])]

[(AUX[ILIARY]nn [,AUX[ILIARY]nn])]

[ * ]

[,OBEYFORM]

Note. When you specify OBEYFORM, TMF does not write the MaxRetainedATFiles field

to the INFO AUDITTRAIL output because this value is only used temporarily during

volume recovery or file recovery.