TMF Reference Manual (G06.24+)

TMFCOM Commands
HP NonStop TMF Reference Manual—522418-002
3-156
INFO BEGINTRANS
3 TMFCOM Commands
INFO BEGINTRANS
The INFO BEGINTRANS command displays the configured attribute values for the
BEGINTRANS object that disable and reenable transaction processing and that apply
limits on resource managers and transaction branches used in heterogeneous
transaction processing.
OBEYFORM
formats the INFO BEGINTRANS output as command file text that can be executed
by TMFCOM. TMF saves this output in the file designated by the OUT option
available with all commands. Subsequently executing this command file produces
a new BEGINTRANS configuration that exactly matches the existing configuration.
OUT option use and command file execution are described in Directing Output to
an Alternate Destination on page 2-8. If OBEYFORM is not specified, normal
formatting is used.
Security Restrictions
Anyone can enter the INFO BEGINTRANS command.
TMF State Requirement
Before you can enter the INFO BEGINTRANS command, TMF must be started.
Usage Guideline
The INFO BEGINTRANS command displays a subset of the information presented by
the INFO TMF
command.
Output Displayed
The INFO BEGINTRANS command displays the attributes configured for the
BEGINTRANS object by ALTER BEGINTRANS commands entered previously or their
defaults. The primary items in the display are listed in Table 3-8.
Because newly configured values for TRANSPERCPU, RECRMCOUNT,
RMOPENPERCPU, and BRANCHESPERRM do not take effect until the next time
TMF is stopped and then restarted, both the currently effective and the configured
values are displayed for these parameters.
INFO BEGINTRANS
[,OBEYFORM]