TMF Reference Manual (G06.24+)

TMFCOM Commands
HP NonStop TMF Reference Manual—522418-002
3-162
INFO DATAVOLS
an Alternate Destination on page 2-8. If OBEYFORM is not specified, normal
formatting is used.
SORT {BYATID | BYNAME}
displays the data volume information in the order indicated:
BYATID
lists data volumes first by audit-trail ID and then alphabetically by data volume
name.
BYNAME
lists the data volumes by name, in alphabetical order. If the SORT parameter
is omitted, this option is the default.
Security Restrictions
Anyone can enter the INFO DATAVOLS command.
TMF State Requirement
Before you can enter the INFO DATAVOLS command, TMF must be started.
Usage Guidelines
You can control the volumes displayed by using the optional config-attrib filters.
These filters can be used with one another to determine even more selectively the
volumes displayed.
Output Displayed
The INFO DATAVOLS command displays the attributes configured for data volumes by
ADD DATAVOLS
and ALTER DATAVOLS commands entered previously. The primary
items in the display are listed in Table 3-10
.
Table 3-10. INFO DATAVOLS Output
Heading or Item Description
Volume Name of the data volume.
Audit Trail Audit trail to which this data volume generates audit information.
Recovery Mode Recovery mode setting (either online or archive).