TMF Reference Manual (G06.24+)

TMFCOM Commands
HP NonStop TMF Reference Manual—522418-002
3-173
INFO PROCESS
*
displays the configured attributes of all process-types.
OBEYFORM
formats INFO PROCESS output as command file text that can be executed by
TMFCOM. TMF saves this output in the file designated by the OUT option
available with all commands. Subsequently executing this command file produces
a new process configuration that exactly matches the existing configuration. OUT
option use and command file execution are described in Directing Output to an
Alternate Destination on page 2-8.
Security Restrictions
Anyone can enter the INFO PROCESS command.
TMF State Requirement
You can enter the INFO PROCESS command at any time, whether or not TMF has
been started.
Output Displayed
The INFO PROCESS command displays the same attributes for all process types.
The primary items in the display are listed in Table 3-12.
Table 3-12. INFO PROCESS Output
Heading or Item Description
Process Type One of the types of TMF processes for which configuration
information is available.
Pri Execution priority of process, expressed as a value ranging from 1
(low priority) to 199 (high priority).
CPUS Processor in which process type runs.
MakeSaveAbend Indication of whether INSPECT program save-abend file is created if
process of this type terminates abnormally.
Debug Indicates whether process of this type enters DEBUG or INSPECT
debugger soon after it is started.
Inspect Indicates whether INSPECT is used if process of this type falls into
debugger after it is started.
Extended SegSize Size of extended segment allocated for process type ALTER
PROCESS.
PFSSize Size of data segment allocated for process type.