TMF Reference Manual (G06.24+)

TMFCOM Commands

HP NonStop TMF Reference Manual—522418-002

3-259

STATUS AUDITDUMP

The STATUS AUDITDUMP command displays the current status of audit dump

processes.

MASTER|MAT

AUX[ILIARY]nn

identifies the audit trail associated with the audit dump process whose status is to

be displayed. MASTER or MAT specifies the master audit trail. AUXILIARYnn or

AUXnn specifies an auxiliary audit trail. nn is a two-digit number ranging from 01

through 15 that specifies one of the 15 potential auxiliary audit trails in the

configuration. If you do not specify this option, TMFCOM displays the status of all

audit dump processes. (When the value of nn is 09 or less, you must specify the

leading zero in this value.)

displays the status of all audit dump processes.

Security Restrictions

Anyone can enter the STATUS AUDITDUMP command.

TMF State Requirement

Before you can enter the STATUS AUDITDUMP command, TMF must be started.

Usage Guideline

The STATUS AUDITDUMP command displays a subset of the information presented

by the STATUS TMF command.

Output Displayed

The STATUS AUDITDUMP command displays the primary items listed in Table 3-18.

STATUS AUDITDUMP [MASTER | MAT ]

[AUX[ILIARY]nn ]

[(MASTER | MAT [,AUX[ILIARY]nn]) ]

[(AUX[ILIARY]nn [,MASTER | MAT]) ]

[(AUX[ILIARY]nn [,AUX[ILIARY]nn])]

[ * ]