TMF Reference Manual (G06.24+)

TMFCOM Commands
HP NonStop TMF Reference Manual—522418-002
3-270
STATUS DATAVOLS
STATUS DATAVOLS
The STATUS DATAVOLS command displays the current status of data volumes.
volume
identifies the data volume whose status is to be displayed.
*
displays the status of all data volumes in the system. If you do not specify a data
volume, this is the default.
STATE
displays information about only those data volumes that are in the state indicated
by this parameter (STATE serves as a filter). For example, STATE ADDING
retrieves information about only those volumes being added to the configuration as
data volumes. If you omit the STATE parameter, information is displayed about all
configured data volumes, regardless of their states.
STATUS DATAVOL[S] [volume ]
[(volume [,volume]...)]
[ * ]
[,STATE {ADDING }
{STARTING }
{STARTUPBEGUN }
{AWAITTRANSRESOLVE}
{QUEUEDFORRECOVERY}
{RECOVERING }
{STARTUPCOMPLETING}
{STARTED }
{NOTSTARTED }
{DOWN }
{DOWNCLEAN }
{DOWNDIRTY }
{SHUTTINGDOWN }
{DISABLING }
{DISABLED }
{DISABLEDCLEAN }
{DISABLEDDIRTY }
{UNCONFIGURED }
{WRONGDISKMOUNTED }]
[,AUDITTRAIL {MASTER | MAT }
{AUX[ILIARY]nn}]
[,RECOVERYMODE {ONLINE | ARCHIVE}]
[,SORT {BYATID | BYNAME} ]