TMF Reference Manual (G06.24+)

TMFCOM Commands

HP NonStop TMF Reference Manual—522418-002

3-276

STATUS OPERATIONS

The STATUS OPERATIONS command displays the status of TMF operations that were

recently completed or are now in progress.

operation-number

is an integer that uniquely identifies the operation for which status information is to

be displayed. The lowest operation number assigned is 1, and the highest is 100.

displays status information for all operations. If you do not specify an operation,

this is the default.

TYPE

displays information only about the type of operation indicated by this parameter.

This option applies only when the wild-card character (*) is specified for

operation-number. You can specify the following operations:

AUDITRESTORE

indicates restoration of audit dumps from tape or disk.

DELETETMF

indicates purging of the TMF configuration.

STATUS OPERATION[S]

[operation-number ]

[(operation-number [,operation-number]...)]

[ * ]

[,TYPE {AUDITRESTORE }

{DELETETMF }

{DUMPFILES }

{RECOVERFILES }

{STARTTMF }

{STOPTMF }

{VOLUMERECOVERY}

{ANY } ]

[,STATE {INPROGRESS}

{FINISHED }

{ALL } ]

[,BEGINTIME date-time [GMT]]

[,SORT {BYNUMBER | BYTIME} ]