TMF Reference Manual (G06.24+)

TMFCOM Commands
HP NonStop TMF Reference Manual—522418-002
3-293
STATUS TMF
Table 3-24. STATUS TMF Output (page 1 of 2)
Heading or Item Description
System Name of the node (system) on which this TMF configuration is running.
State Current operating status of TMF, reported as one of the following entries
and subentries. (In the following list, each status entry and subentry is
followed by an explanation of its meaning.)
Empty Audit Trail Configuration
TMF has been brought up for the first time on this node and thus no
configuration exists for it, or a DELETE TMF
command was
executed. To start TMF, you must use the ADD AUDITTRAIL
command to add at least one audit trail.
Configuring New Audit Trails
TMF has not yet been started with this configuration. Thus, you can
still add new audit trails with the ADD AUDITTRAIL
command, alter
previously added audit trails with the ALTER AUDITTRAIL
command, or start TMF with the START TMF command.
Stopped
TMF is stopped.
Starting
TMF is starting and is in one of the following conditions (noted in
parentheses in the display):
Services
TMF is starting audit trail service and other services.
Waiting for Network Transactions to be Resolved
TMF is waiting for all network transactions to be resolved.
Data Volumes
TMF is starting data volumes.
Running Backout
TMF is backing out transactions that must be aborted.
Started
TMF has started.