TMF Reference Manual (G06.24+)

TMFCOM Commands
HP NonStop TMF Reference Manual—522418-002
3-294
STATUS TMF
In addition to the information in Table 3-24, hung transactions in the system are also
reported.
The other items that appear in the display are explained in the command descriptions
for the STATUS AUDITDUMP, STATUS AUDITTRAIL, STATUS BEGINTRANS, and
STATUS CATALOG commands.
Examples
The following STATUS TMF command displays typical output:
TMF 61> STATUS TMF
TMF Status:
System: \FOXII, Time: 10-Feb-2002 09:54:27
State: started
Transaction Rate: 0.10 TPS
AuditTrail Status:
Master
Active audit trail capacity used: 68%
First pinned file: $MAT1.ZTMFAT.AA000044
Reason: Active transactions(s).
Current file: $MAT1.ZTMFAT.AA000045
AuditDump Status:
Master: State: enabled, Status: active, Process \LA.$X545,
File: $MAT2.ZTMFAT.AA000042
BeginTrans Status: ENABLED
State (continued)Stopping
TMF is stopping and is in one of the following conditions (noted in
parentheses in the display):
Waiting for Transactions to Finish
TMF is waiting for all transactions to be completed.
Data Volumes
TMF is stopping data volumes.
Waiting for RDF
TMF is waiting for the Remote Database Facility (RDF) to shut
down.
Services
TMF is stopping audit trail service and other services.
Deleting
TMF is purging its current configuration, audit trails, and volume and
file recovery information for the database in response to a DELETE
TMF command.
Transaction Rate Current TMF transaction rate, in transactions-per-second.
Table 3-24. STATUS TMF Output (page 2 of 2)
Heading or Item Description