TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-13
Message Descriptions
34
Cause. The command specified an invalid process priority in the PRI option. The
TMP process’ priority must be 204. The TMFMON process’ priority must be 211. The
priority of all other processes must fall in the range 1 through 199, inclusive.
Effect. The command fails.
Recovery. Re-enter the command, using a valid priority number for the process
specified.
35
filename
is the invalid or improper file name.
Cause. The command included an OUT option that specified an invalid or partially
qualified file name. Perhaps the file name was too long or contained improper
characters, or maybe the volume or subvolume specifiers were omitted.
Effect. The command fails.
Recovery. Verify that the file name complies with the syntax rules listed in File Names
and Process Identifiers on page 3-6. Then, re-enter the command, using a fully-
qualified, valid file name.
36
Cause. The command specified an invalid CPU parameter, perhaps using a value
greater than 15 or a negative value. This parameter can only be an integer from 0
through 15.
Effect. The command fails.
Recovery. Re-enter the command, using an integer from 0 through 15, inclusive, for
the CPU.
The command specified an invalid PRI option. The PRI
parameter must be 204 for the TMP process, 211 for the TMFMON
process, or a value between 1 and 199, inclusive, for all
other processes.
The command specified an OUT filename that was invalid or
that contained a wild-card character. The invalid OUT file
name was filename.
The command specified an invalid CPU parameter. Use a value
from 0 through 15 inclusive to specify the CPU in which the
process runs.