TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-23
Message Descriptions
70
Cause. An ADD DUMPS command specified multiple file names in the audit-
trail-file parameter, but only one file name is allowed. This name must be
entered in the format shown under “Recovery.”
Effect. The command fails.
Recovery. Re-enter the command, using just one file name entered in the following
format:
$ZTMFAT.ZTMFAT.[file-id]
72
Cause. The command specified more than 16 tape volumes in the TAPEMEDIA
parameter, but only a maximum of 16 volumes are allowed.
Effect. The command fails.
Recovery. Re-enter the command specifying 16 or fewer volumes in TAPEMEDIA.
73
serial-number
is the invalid serial number.
Cause. The command specified an invalid serial number in the SERIAL parameter
used to identify a dump to be added to the catalog. This serial number must be 64 or
greater.
Effect. The command fails.
Recovery. Re-enter the command with SERIAL indicating a dump serial number of 64
or greater.
When adding an audit dump into the catalog, the command must
specify exactly one filename.
The command can only specify a maximum of 16 tape volumes
with the TAPEMEDIA parameter.
The command specified an invalid SERIAL parameter. The value
must be greater than 63. Your value was serial-number.