TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-25
Message Descriptions
76
Cause. The command specified a parameter that is not compatible with the MEDIUM
DISK parameter. MEDIUM DISK specifies the kind of medium on which dumps are
recorded, but the incompatible parameter might be one that applies only to tape-based
dumps−for example, BLOCKSIZE, COPIES, SYSTEM, or VERIFYTAPE.
Effect. The command fails.
Recovery. Re-enter the command without the incompatible parameter.
77
filename
is the invalid file name.
Cause. The command specified one (or more) DISKMEDIA names as the destination
disk volumes for dumps, but this name was not entered in a valid format. The formats
permitted are the following:
remote-node.volume.prefix
local-node.volume.prefix
local-node.volume
volume
volume.prefix
Effect. The command fails.
Recovery. Verify that the file name complies with the syntax rules listed in File Names
and Process Identifiers on page 3-6 and with the additional restrictions noted in this
message description. Then, re-enter the command, specifying the correctly formed
name for DISKMEDIA.
78
Cause. A DUMP FILES command attempted to reset the DISKMEDIA attribute, but
this attribute cannot be reset in the current context.
Effect. The command fails.
Recovery. Re-enter the command without specifying disk media reset.
One of the options specified is not allowed with MEDIUM DISK.
The command specified a DISKMEDIA name that was not correctly
formed. The invalid DISKMEDIA was: filename.
In this context, the command cannot RESET the DISKMEDIA.