TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-33
Message Descriptions
110
Cause. A STATUS OPERATIONS command specified a value other than
INPROGRESS, FINISHED, or ALL for the STATE parameter.
Effect. The command fails.
Recovery. Re-enter the command with STATE set to INPROGRESS, FINISHED, or
ALL.
111
Cause. A STATUS OPERATIONS command specified an improper value for the TYPE
parameter. (See the command syntax description for the list of acceptable values.)
Effect. The command fails.
Recovery. Re-enter the command with TYPE set to a proper value.
112
Cause. A STATUS OPERATIONS command specified an improper value for the
BEGINTIME parameter. (See the command syntax description for the acceptable
values.)
Effect. The command fails.
Recovery. Re-enter the command with BEGINTIME set to a proper value.
113
Cause. A STATUS OPERATIONS command specified an improper value for the
operation-number parameter. (See the command syntax description for the
acceptable values.)
Effect. The command fails.
Recovery. Re-enter the command with operation-number set to a proper value.
The command specified an erroneous STATE value.
The command specified an erroneous TYPE value.
The command specified an erroneous BEGINTIME value.
The command specified an erroneous operation-number value.