TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-91
Message Descriptions
315
Cause. The command attempted to add an additional device for a particular dump to
the TMF catalog, but the device is not the same type as the devices previously
assigned for this dump.
Effect. The command fails.
Recovery. Re-enter the command, using a device of the same type (either tape or
disk) as those devices already assigned for the dump.
316
errcode
supplies a numeric code that further defines the error and identifies the subsystem
or system procedure that transmitted this code: TMF, the File System, the
NEWPROCESS process-control procedure, or the Enform query language and
report writer.
Cause. While the command attempted to remove the specified fileset from the TMF
configuration, the condition indicated by errcode occurred.
Effect. The command fails.
Recovery. Refer to the following manuals for a description of the error code:
For further details about understanding and correcting File System and
NEWPROCESS errors, see the Guardian Procedure Errors and Messages Manual.
Correct the error condition reported, if necessary, and re-enter the command.
The command attempted to add a device for an existing dump in
the catalog, but the dump medium (TAPE or DISK) specified did
not match that of the existing dump.
Unable to delete the specified *.*.* because of errcode.
Transmitting
Subsystem Manual
Appendix Containing
Description
TMF This reference manual This appendix
File system Operator Messages Manual “File-System Errors” Appendix
NEWPROCESS
procedure
Operator Messages Manual “NEWPROCESS Errors”
Appendix
Enform subsystem Enform Plus Reference
Manual
“Error Messages” Appendix