TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-93
Message Descriptions
318
errcode
supplies a numeric code that further defines the error and identifies the subsystem
or system procedure that transmitted this code: TMF, the File System, the
NEWPROCESS process-control procedure, or the Enform query language and
report writer.
Cause. When the command attempted to delete a dump from the TMF catalog, the
dump remained in the catalog. Furthermore, one or more disk devices assigned for
the dump could not be removed from the configuration because of the condition
indicated by errcode.
Effect. The command fails.
Recovery. Refer to the following manuals for a description of the error code:
See the EMS event log file to discover which devices were not removed. For further
details about understanding and correcting File System and NEWPROCESS errors,
see the Guardian Procedure Errors and Messages Manual.
Correct the error condition reported, if necessary, and re-enter the command.
319
Cause. An ADD DUMPS command identified multiple disks for an audit dump, but
only one disk is allowed.
Effect. The command fails.
Recovery. Re-enter the command with a single DISKMEDIA option.
The command did not purge some or all of the DISKMEDIA from
disk because of errcode. See the log for the specific
DISKMEDIA. The dump has not been removed from the catalog.
Transmitting
Subsystem Manual
Appendix Containing
Description
TMF This reference manual This appendix
File system Operator Messages Manual “File-System Errors” Appendix
NEWPROCESS
procedure
Operator Messages Manual “NEWPROCESS Errors”
Appendix
Enform subsystem Enform Plus Reference
Manual
“Error Messages” Appendix
The command specified more than one DISKMEDIA for an audit
dump.