TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-95
Message Descriptions
325
Cause. The command attempted to remove all active-audit volumes from the system,
but a TMF configuration must have at least one such volume.
Effect. The command fails.
Recovery. Re-enter the command without specifying all remaining audit volumes;
leave at least one such volume in the system.
326
Cause. The command attempted to delete all restore-audit volumes from the system,
but a TMF configuration must have at least one such volume.
Effect. The command fails.
Recovery. Re-enter the command without specifying all remaining restore-audit
volumes; leave at least one such volume in the system.
327
volume
is the volume name.
Cause. The command attempted to configure as an active-audit volume a volume that
has already been configured for another audit trail. However, any audit volume can
only be active for one audit trail at a time.
Effect. The command fails.
Recovery. Re-enter the command, specifying another audit volume for this audit trail.
This command would result in no active audit trail volumes
being configured.
This command would result in no restore audit trail volumes
being configured when AUDITDUMP is ON.
Volume volume is already configured as an active audit volume
for another audit trail. A volume can only be active for a
single audit trail.