TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-118
Message Descriptions
395
Cause. The command set the RECOVERYMODE option to ARCHIVE, but the audit
trail was not configured for audit dumping.
Effect. The command fails.
Recovery. Possible recovery actions are as follows:
•
If you unintentionally set RECOVERYMODE to ARCHIVE, re-enter the ADD
DATAVOLS or ALTER DATAVOLS command with RECOVERYMODE set to
ONLINE.
•
If you do not really need to alter the data volume configuration, leave it as is with
the RECOVERYMODE set to ONLINE.
•
If the data volume is pinning an audit-trail file and you are willing to give up volume
recovery for that volume in return for freeing the audit trail, delete the data volume
from the configuration; you can re-add the volume later if you wish.
•
If the audit trail should really be configured for audit dumping, you can use the
ALTER AUDITTRAIL command to turn audit dumping on. Then, re-enter the ADD
DATAVOLS command.
ARCHIVE recovery mode requires that the specified audit trail
be configured for audit dumping.
Caution. Turning on audit dumping can have a significant impact on TMF operations and
should only be performed with the consent of your system manager. For further information
about audit dumping, see the ADD AUDITTRAIL and ALTER AUDITTRAIL command
descriptions in Section 3, TMFCOM Commands
.