TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-164
Message Descriptions
7011
Cause. An ALTER PROCESS command did not specify a valid value in the CPU
option, perhaps using a number greater than 15 or a negative value for a processor
number. This value must be an integer from 0 through 15, inclusive.
Effect. The command fails.
Recovery. Re-enter the command, using an integer from 0 through 15 for the
processor number.
7012
Cause. An ALTER PROCESS command did not specify a valid process file segment
size in the PFSSIZE option. This value must be an integer from 131,072 through
1,048,576.
Effect. The command fails.
Recovery. Re-enter the command, using a valid process file segment size in the
PFSSIZE option.
7013
Cause. An ADD TAPEMEDIA or ALTER TAPEMEDIA command did not specify a valid
tape-volume name. This required parameter must begin with either a letter or a digit.
If the name begins with a digit, up to five digits can follow. If the name begins with a
letter, up to five digits or letters in any combination can follow.
Effect. The command fails.
Recovery. Re-enter the command, using a valid tape volume name.
Expecting CPU number in the range 0-15.
Expecting PFSSIZE in the range 131,072 - 1,048,576.
Expecting valid tape volume. Must be 1 - 6 numeric
characters or 1 -6 alphanumeric characters starting with an
alpha character.