TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-166
Message Descriptions
7018
Cause. An ADD TAPEMEDIA or SET TAPEMEDIA command did not specify a valid
value in the DENSITY option. This value must be 0, 1600, or 6250.
Effect. The command fails.
Recovery. Re-enter the command, specifying a valid density.
7019
Cause. The command did not specify 0, 1600, or 6250 where TMFCOM expected one
of these values.
Effect. The command fails.
Recovery. Check the syntax rules for the command and re-enter it correctly.
7020
Cause. An ADD DUMPS or SET DUMPS command did not specify a valid tape
volume identification in the TAPEMEDIA parameter. This identification must be in the
format tape-volume:part:copy.
Effect. The command fails.
Recovery. Re-enter the command, specifying the tape volume identification in the
correct format.
7021
Cause. An ADD DUMPS or SET DUMPS command did not specify a valid number of
copies in the TAPEMEDIA option. This value must be either 1 or 2.
Effect. The command fails.
Recovery. Re-enter the command, specifying a valid number of copies.
Expecting DENSITY value of 0, 1600, or 6250.
Expecting one of 0, 1600, or 6250.
Expecting a TAPEMEDIA name. Format is tape-volume:part:copy.
Expecting TAPEMEDIA copy number (1-2).