TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-201
Message Descriptions
7172
Cause. An ALTER BEGINTRANS command did not specify a correct keyword where
TMFCOM expected one of those listed in the message.
Effect. The command fails.
Recovery. Check the syntax rules for the command and re-enter it accordingly.
7173
Cause. A RESET BEGINTRANS command did not specify a correct keyword where
TMFCOM expected one of those listed in the message.
Effect. The command fails.
Recovery. Check the syntax rules for the command and re-enter it accordingly.
7174
Cause. The TIME option of an ADD DUMPS or RECOVER FILES command, or the
BEGINTIME option of a DISPLAY OPERATIONS or STATUS OPERATIONS
command, did not specify a correct keyword where TMFCOM expected one of those
listed in the message.
Effect. The command fails.
Recovery. Check the syntax rules for the command and re-enter it accordingly.
7175
Cause. The AUTOABORT option of an ALTER BEGINTRANS command did not
specify the HOUR value as an integer ranging from 1 through 5965.
Effect. The command fails.
Recovery. Re-enter the command, specifying a valid hour value.
Expecting AUTOABORT, BRANCHESPERRM, RECRMCOUNT, RESET,
RMOPENPERCPU, TMFLIBMEMTHRESH, TMPMEMTHRESH,
TRANSCOUNTTHRESH, or TRANSPERCPU.
Expecting AUTOABORT, BRANCHESPERRM, RECRMCOUNT, RMOPENPERCPU,
TMFLIBMEMTHRESH, TMPMEMTHRESH, TRANSCOUNTTHRESH, or
TRANSPERCPU.
Expecting HOUR[S], MINUTE[S], or SECOND[S].
Invalid AUTOABORT HOUR value. Must be between 1 and 5965.