TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-206
Message Descriptions
7191
Cause. The command did not specify TMP where TMFCOM expected this keyword.
Effect. The command fails.
Recovery. Check the syntax rules for the command and re-enter it accordingly.
7192
Cause. A CANCEL OPERATIONS or DISPLAY OPERATIONS command did not
specify an operation number.
Effect. The command fails.
Recovery. Check the syntax rules for the command and re-enter it accordingly.
7193
Cause. A STATUS OPERATIONS command specified a single operation number, but
enclosed it within parentheses. (Use parentheses only when specifying multiple
identifiers.)
Effect. The command fails.
Recovery. Check the syntax rules for the command and re-enter it accordingly.
7194
Cause. A STATUS OPERATIONS command included the symbol for all operations (*)
in an invalid context--for example, when one or more specific operation numbers also
appeared in the command.
Effect. The command fails.
Recovery. Check the syntax rules for the command. Then, re-enter the command,
including only the * symbol or omitting it altogether.
Expecting TMP.
Expecting an operation number.
Expecting a single operation number, without "(...)".
A "*" operation number is not valid in this context.