TMF Reference Manual (G06.24+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-216
Message Descriptions
7230
Cause. A RELOCATE DUMPS command did not specify both OLDDMLOC and
NEWDMLOC where TMFCOM expected these keywords.
Effect. The command fails.
Recovery. Check the syntax rules for the command and re-enter it accordingly.
7231
Cause. A RELOCATE DUMPS command omitted the disk media location in either or
both of the OLDDMLOC or NEWDMLOC parameters.
Effect. The command fails.
Recovery. Check the syntax rules for the command and re-enter it accordingly.
7232
Cause. A RELOCATE DUMPS command specified an invalid disk media location in
either or both of the OLDDMLOC or NEWDMLOC parameters. This value must be
entered in the format [\node.]{* | volume}.
Effect. The command fails.
Recovery. Check the syntax rules for the command. Then, re-enter the command,
specifying a valid disk media location in the correct format.
7233
Cause. A START TMF command did not specify a correct keyword where TMFCOM
expected one of those listed in the message.
Effect. The command fails.
Recovery. Check the syntax rules for the command and re-enter it accordingly.
Expecting both OLDDMLOC or NEWDMLOC disk media locations.
Expecting a diskmedia location.
Invalid diskmedia location. Must be [\Node.]{*|volume}.
Expecting NOWAIT, ENABLE, or DISABLE.