TMF Reference Manual (G06.26+)

TMFCOM Commands

HP NonStop TMF Reference Manual—522418-003

3-141

DISABLE AUDITDUMP

The DISABLE AUDITDUMP command suspends an audit dump process, preventing

the dumping of audit-trail files.

MASTER | MAT

AUX[ILIARY]nn

specifies the audit trail associated with the audit dump process that is to be

suspended, thus identifying that process. MASTER or MAT specifies the master

audit trail. AUXILIARYnn or AUXnn specifies an auxiliary audit trail. nn is a two-

digit number ranging from 01 to 15 that specifies one of the 15 potential auxiliary

audit trails in the configuration.

ABRUPT

requests that, if an audit dump process is currently running, TMF abort that

process and discard the dump it is preparing. If you omit this option and an audit

dump process is running, that process completes the dump.

Security Restrictions

You can issue the DISABLE AUDITDUMP command only if you are a member of the

super user group.

TMF State Requirement

You can enter the DISABLE AUDITDUMP command at any time, whether or not TMF

has been started. However, the audit trail associated with the dump must be

configured for dumping (in other words, its AUDITDUMP attribute must be set to ON).

Usage Guidelines

The audit dump process identified in the DISABLE AUDITDUMP command remains

disabled until you explicitly issue an ENABLE AUDITDUMP command. The process

remains disabled even if you stop and restart TMF; you must issue ENABLE

AUDITDUMP to resume the dump.

If you specify ABRUPT in the DISABLE AUDITDUMP command, the file whose dump

is aborted is the first file to be dumped when dumping is reenabled.

DISABLE AUDITDUMP {MASTER | MAT }

{AUX[ILIARY]nn}

[,ABRUPT]