TMF Reference Manual (G06.26+)
TMFCOM Commands
HP NonStop TMF Reference Manual—522418-003
3-189
INFO DATAVOLS
INFO DATAVOLS
The INFO DATAVOLS command displays the configured attribute values of data
volumes, and can also filter and then display volumes based on selected configuration
attributes.
volume
identifies the data volume whose attribute values are to be displayed.
*
displays the attribute values of all configured data volumes. If you do not specify a
data volume, this action is the default.
config-attrib
filters the volumes selected for display, and can be specified in either of two ways:
AUDITTRAIL {MASTER | MAT }
{AUX[ILIARY]nn}
displays information only for data volumes that send their audit records to the
specified audit trail. MASTER or MAT specifies the master audit trail.
AUXILIARYnn or AUXnn specifies an auxiliary audit trail. nn is a two-digit
number ranging from 01 through 15 that specifies one of the 15 potential
auxiliary audit trails in the configuration. If this attribute is not specified,
information about all data volumes auditing to any audit trail is displayed.
RECOVERYMODE {ONLINE | ARCHIVE}
displays information only for data volumes that have been assigned the
recovery mode (either online or archive) that you specify in this parameter.
OBEYFORM
formats the INFO DATAVOLS output as command file text that can be executed by
TMFCOM. TMF saves this output in the file designated by the OUT option
available with all commands. Subsequently executing this command file produces
a new data volume configuration that exactly matches the existing configuration.
OUT option use and command file execution are described in Directing Output to
INFO DATAVOL[S] [volume ]
[(volume [,volume]...)]
[ * ]
[,config-attrib [,config-attrib]...]
[,OBEYFORM ]
[, SORT {BYATID | BYNAME} ]