TMF Reference Manual (G06.26+)

TMFCOM Commands
HP NonStop TMF Reference Manual—522418-003
3-213
INFO TMF
a START TMF command preceding these commands.
Output Displayed
Most of the primary items presented by the INFO TMF display are also listed by the
following commands, and are discussed in the descriptions of those commands:
•
INFO AUDITTRAIL (Table 3-10)
•
INFO AUDITDUMP (Table 3-9)
•
INFO CATALOG (Table 3-12)
•
INFO BEGINTRANS (if TMF is started) (Table 3-11)
In addition, INFO TMF also displays the audit-trail format (1 or 2) next to the Audittrail
Format heading, plus the items related to performance-tuning attributes set by the
ALTER TMF command and listed in Table 3-18. For more information about these
attributes, see ALTER TMF on page 3-110.
Examples
The following INFO TMF command presents the combined attribute display:
TMF 40> INFO TMF
Configuration Volume:
$SYSTEM
Audittrail Format 2
GoRemote Msg
PioBuffer (600,1,100000)
TransactionProtocol Standard
AuditTrail Configuration:
Master
ActiveVols: $AUDIT
Note. To augment the information captured through the INFO TMF, CNFG command, you can
capture current information about TMF online and audit dumps by using the INFO DUMPS,
OBEYFORM command. For more information about this step, see INFO DUMPS on
page 3-193.
Table 3-18. INFO TMF Output for Performance-Tuning Attributes
Heading or Item Description
GoRemote GOREMOTE setting, which specifies whether the PIO
mechanism or the Message System is used to send
GoRemote requests to the TMP.
PioBuffer PIOBUFFER settings, which establish the transport buffer
configuration.
TransactionProtocol TRANSACTIONPROTOCOL setting, which determines the
protocol used to flush transactions upon their completion.