TMF Reference Manual (G06.26+)

TMFCOM Commands
HP NonStop TMF Reference Manual—522418-003
3-310
STATUS DATAVOLS
Examples
The following STATUS DATAVOLS command, issued without specifying volume names
or other options, displays the status of all data volumes in the configuration:
TMF 42> STATUS DATAVOLS
Audit Recovery
Volume Trail Mode State
----------------------------------------------------
$DATA1 MAT Online Started
$DATA2 MAT Online Started
$DATA3 MAT Online Started
$DATA4 MAT Online Recovering
$DATA5 MAT Archive Recovering
$DATA6 AUX01 Online Started
$DATA7 AUX01 Online Started
$DATA8 AUX01 Archive Recovering
$DATA9 AUX01 Online Started
The next STATUS DATAVOLS command displays all information for all disabled data
volumes whose recovery mode is ONLINE:
TMF 56> STATUS DATAVOLS,STATE DISABLED, RECOVERYMODE ONLINE
Audit Recovery
Volume Trail Mode State
----------------------------------------------------
$DATA4 MAT Online Disabled (Clean)
The last STATUS DATAVOLS command determines which volumes in the system are
not part of the TMF configuration:
TMF 60> STATUS DATAVOLS, STATE UNCONFIGURED
Audit Recovery
Volume Trail Mode State
----------------------------------------------------
$DATA0 - - Unconfigured
$SPARE - - Unconfigured
Table 3-22. STATUS DATAVOLS Output
Heading or Item Description
Volume Name of the data volume.
Audit Trail Audit trail to which this data volume generates audit records.
Recovery Mode Recovery mode setting (either online or archive).
State The current status of the data volume, indicating its state.