TMF Reference Manual (G06.26+)

TMFCOM Commands
HP NonStop TMF Reference Manual—522418-003
3-332
STATUS TMF
Examples
The following STATUS TMF command displays typical output:
TMF 61> STATUS TMF
TMF Status:
System: \NSKED, Time: 14-Jul-2004 11:00:45
State: started
CommitHold activated for (MAT, AUX02) at 7/14/04 10:30
Transaction Rate: 1.05 TPS
TmpWaitTimer 35000 Microseconds
AuditTrail Status:
Master
Active audit trail capacity used: 3%
First pinned file: $AUDIT.ZTMFAT.AA000046
Reason: Current File
Current file: $AUDIT.ZTMFAT.AA000046
CommitHold activated on 7/14/04 10:32 by $AUDIT. After
240 seconds, CommitHold will be suspended.
WARNING: Commit Hold is activated because one or more
audit disk processes can no longer guarantee RDF ZLT.
TMF requested audit writes are held and no transactions are
allowed to commit or abort while Commit Hold is activated.
The TMF subsystem will shortly quit responding to most
requests until the problem is resolved.
Auxiliary01
Active audit trail capacity used 0%
First pinned file: $DATA03.ZTMFAT.BB000003
Reason: Current File
Current file: $DATA03.ZTMFAT.BB000003
Auxiliary02
Active audit trail capacity used: 0%
First pinned file: $DATA06.ZTMFAT.CC000008
Reason: Current File
Current File: $DATA06.ZTMFAT.CC000008
CommitHold activated on 7/14/04 10:30 by $DATA06. After
240 seconds, CommitHold will be suspended.
WARNING: Commit Hold is activated because one or more
audit disk processes can no longer guarantee RDF ZLT.
TMF requested audit writes are held and no transactions are
allowed to commit or abort while Commit Hold is activated.
The TMF subsystem will shortly quit responding to most
requests until the problem is resolved.
AuditDump Status:
Master: State: enabled, Status: inactive
BeginTrans Status: ENABLED
Catalog Status:
Status: up
.
.
.