TMF Reference Manual (G06.26+)

TMFCOM Commands
HP NonStop TMF Reference Manual—522418-003
3-333
STATUS TMF
Another STATUS TMF command and resulting output appears next. (Notice that
because commit-hold mode was suspended, the commit-hold warning message shown
in the previous example does not appear.)
TMF 62> STATUS TMF
TMF Status:
System: \NSKED, Time: 15-Jul-2004 10:56:45
State: started
CommitHold suspended at 7/15/04 10:45 by timeout
Transaction Rate: 1.05 TPS
TmpWaitTimer 35000 Microseconds
AuditTrail Status:
Master
Active audit trail capacity used: 3%
First pinned file: $AUDIT.ZTMFAT.AA000046
Reason: Current File
Current file: $AUDIT.ZTMFAT.AA000046
CommitHold activated on 7/15/04 10:32 by $AUDIT.
Auxiliary01
Active audit trail capacity used 0%
First pinned file: $DATA03.ZTMFAT.BB000003
Reason: Current File
Current file: $DATA03.ZTMFAT.BB000003
Commithold activated; $DATA03 revive started at
7/14/04 10:50
AuditDump Status:
Master: State: enabled, Status: inactive
BeginTrans Status: ENABLED
Catalog Status:
Status: up
.
.
.
The output from the next STATUS TMF command illustrates that some of the status
might not be available when TMF is in certain states. This example shows the display
when TMF is in the stopped state:
TMF 64> STATUS TMF
TMF Status:
System: \FOXII, Time: 10-Feb-2002 09:58:14
State: stopped
Transaction Rate: 0.00 TPS