TMF Reference Manual (G06.26+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-103
Message Descriptions
332
volume
is the name of the volume specified in the command.
at-volume-type
is the volume type specified in the command.
Cause. The command attempted to add a 17th volume of type at-volume-type, but
only up to 16 of this type are permitted. at-volume-type must be ACTIVEVOL,
OVERFLOWVOL, or RESTOREVOL, to indicate an active-, overflow-, or restore-audit
volume, respectively.
Effect. The command fails.
Recovery. Re-enter the command, specifying a different type of audit volume, or
delete one of the present audit volumes of this type and then add another.
333
volume
is the name of the volume specified in the command.
Cause. The command attempted to add a data volume to the configuration as an audit
volume, but data volumes cannot be used as audit volumes.
Effect. The command fails.
Recovery. Re-enter the command, specifying another volume that is not a data
volume.
Attempt to add volume volume failed because an audit trail
can only have 16 volumes configured as at-volume-type.
Volume volume cannot be added as an active audit volume
because it is currently configured as a data volume.