TMF Reference Manual (G06.26+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-112
Message Descriptions
355
Cause. An ADD AUDITTRAIL command attempted to add an audit trail while TMF is
stopped, after TMF was started for the first time. New audit trails, however, can only
be added either (1) before you start TMF for the first time or (2) at any later time,
provided that TMF is started. The new audit trails must be auxiliary audit trails.
Effect. The command fails.
Recovery. Start TMF and re-issue the command.
356
volume
is the name of the volume specified in the command.
at-volume-type
is the audit volume type specified in the command.
Cause. An ALTER AUDITTRAIL command attempted to delete a volume specified as
an at-volume-type, but this volume was not that type. For example, the command
specified DELETEACTIVEVOL (indicating an active-audit volume) when it should have
specified DELETEDOVERFLOWVOL (indicating an overflow-audit volume).
Effect. The command fails.
Recovery. Re-enter the command, using the appropriate deletion parameter. This
parameter must be set to DELETEACTIVEVOL, DELETEOVERLOWVOL, or
DELETERESTOREVOL.
Audit trails cannot be added while TMF is stopped if TMF has
ever been started.
Volume volume could not be deleted as at-volume-type.