TMF Reference Manual (G06.26+)

TMFCOM Messages
HP NonStop TMF Reference Manual522418-002
A-140
Message Descriptions
486
Cause. A Subsystem Programmatic Interface (SPI) violation occurred.
Effect. The command fails.
Recovery. This message should never appear in TMFCOM. Make a note of the
command entered and the circumstances. Then, contact the GCSC or your service
provider.
487
Cause. An ALTER TMF command specified, in the PIOBUFFER option, an invalid
value for the maximum number of library broadcast elements (LBEs) that a PIO buffer
can hold.
Effect. The command fails.
Recovery. Re-enter the command, specifying a maxpiosperbuffer value in the
range of 1 through 100 in the PIOBUFFER option.
488
Cause. An ALTER TMF command specified, in the PIOBUFFER option, an invalid
value for the length of time the TMP waits after completing its latest work, before
transmitting the PIO buffer contents.
Effect. The command fails.
Recovery. Re-enter the command, specifying a piodelaytimer value in the range
of 10000 through 2000000 in the PIOBUFFER option.
Only one FileSetDefault token is allowed for this command.
The PIOBUFFER MaxPiosPerBuffer value is invalid. Expecting 1
through 100.
The PIOBUFFER PioDelayTimer value is invalid. Expecting
10000 through 2000000.