TMF Reference Manual (G06.26+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-224
Message Descriptions
7183
Cause. An ALTER BEGINTRANS command specified one or more incorrect values in
the TRANSPERCPU parameter. Each of the values must be in the range from 1 to
1073741824.
Effect. The command fails.
Recovery. Re-enter the command, specifying correct TRANSPERCPU values.
7184
Cause. An ALTER CATALOG command did not specify a correct keyword where
TMFCOM expected one of those listed in the message.
Effect. The command fails.
Recovery. Check the syntax rules for the command and re-enter it accordingly.
7185
Cause. An ALTER CATALOG command did not specify RETAINDEPTH where
TMFCOM expected this keyword.
Effect. The command fails.
Recovery. Check the syntax rules for the command and re-enter it accordingly.
7186
Cause. An ALTER CATALOG command specified an incorrect value in the
RETAINDEPTH parameter. This value must be in the range from 1 to 99.
Effect. The command fails.
Recovery. Check the syntax rules for the command. Then, re-enter the command,
specifying a valid RETAINDEPTH value.
Incorrect TRANSPERCPU values. The values must be between 1
and 1073741824.
Expecting RELEASED, RESET, RETAINDEPTH, or ROUNDROBIN.
Expecting RETAINDEPTH.
Incorrect RETAINDEPTH value. The value must be between 1 and
99.