TMF Reference Manual (G06.26+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-252
Message Descriptions
7304
Cause. A RECOVER FILES command specified a relative byte address (rba) that
exceeded the maximum value allowed in the TOMATPOSITION parameter.
Effect. The command fails.
Recovery. Re-enter the command, using a valid rba.
7305
Cause. An ALTER TMF, ATFORMAT command did not specify a valid format number
in the ATFORMAT option. This value must be either 1 or 2.
Effect. The command fails.
Recovery. Re-enter the command, specifying 1 or 2 as the format number.
7307
Cause. The current TMFCOM session is directing its commands to an older version of
TMFSERVE in which the TMF 3.3 features are not available.
Effect. The command fails.
Recovery. With the OPEN SERVER command, open a TMFSERVE process running
the G08AFW version of TMFSERVE or later. Then, enter any TMFCOM command you
wish.
Expecting audit trail RBA number between 0 and 1048575 MB (in
bytes).
The value specified for ATFORMAT is invalid. Expecting 1
or 2.
The currently opened TMFSERVE process does not support the
TMF 3.3 options. Requires TMFSERVE version G08AFW or later.