TMF Reference Manual (G06.26+)

TMFCOM Messages
HP NonStop TMF Reference Manual—522418-002
A-254
Message Descriptions
7313
Cause. A Subsystem Programmatic Interface (SPI) violation occurred.
Effect. The command fails.
Recovery. This message should never appear. Make a note of the command entered
and the circumstances. Then, contact the GCSC or your service provider.
7315
Cause. An ALTER TMF command specified a value other than MSG, PIO, or
PIOPRIORITY in the GOREMOTE parameter.
Effect. The command fails.
Recovery. Re-enter the command, specifying MSG, PIO, or PIOPRIORITY in the
GOREMOTE parameter.
7316
Cause. An ALTER TMF command did not specify a correct keyword following the
RESET keyword. The keyword must be one of those in the message.
Effect. The command fails.
Recovery. Re-enter the command, specifying a proper keyword after RESET.
7317
Cause. An ALTER TMF command specified a value other than MMI or STANDARD in
the TRANSACTIONPROTOCOL parameter.
Effect. The command fails.
Recovery. Re-enter the command, specifying either MMI or STANDARD in the
TRANSACTIONPROTOCOL parameter.
Incorrect MaxPiosPerBuffer value. The value must be between
1 and 100.
The value specified for GOREMOTE is invalid. Expecting MSG,
PIO, or PIOPRIORITY.
The value specified for RESET is invalid. Expecting
GOREMOTE, PIOBUFFER, TMPWAITTIMER, or TRANSACTIONPROTOCOL.
The value specified for TRANSACTIONPROTOCOL is invalid.
Expecting MMI or STANDARD.