TMF Reference Manual (G06.26+)

TMFCOM Commands

HP NonStop TMF Reference Manual—522418-003

3-46

ALTER AUDITDUMP

The ALTER AUDITDUMP command changes the configured attribute values of an

audit dump process.

MASTER | MAT

AUX[ILIARY]nn

specifies the audit trail associated with the audit dump process whose attributes

are to be altered, thus identifying that process. MASTER or MAT specifies the

master audit trail. AUXILIARYnn or AUXnn specifies an auxiliary audit trail. nn is

a two-digit number ranging from 01 to 15 that specifies one of the 15 potential

auxiliary audit trails in the configuration. (When the value of nn is 09 or less, you

must specify the leading zero.)

The specified audit trail must be configured with the AUDITDUMP ON option. (For

more information about that option, see the ADD AUDITTRAIL command

description.)

ALTER AUDITDUMP {MASTER | MAT }

{AUX[ILIARY]nn}

[,BLOCKSIZE {4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36

| 40 | 44 | 48 | 52}]

[,RESET BLOCKSIZE ]

[,COPIES 1 [PARALLEL | SERIES]]

[,COPIES 2 [PARALLEL | SERIES]]

[,COPIES 3 SERIES ]

[,RESET COPIES ]

[,SYSTEM {node }

{(node, node)}]

[,RESET SYSTEM ]

[,VERIFYTAPE {OFF | ON}]

[,UNLOAD {ON | OFF }]

[,[MEDIUM {TAPE}

{DISK}]

[RESET MEDIUM]]

[,ADDDISKMEDIA {disk }

{(disk [,disk]...)}]

[,DELDISKMEDIA {disk }

{(disk [,disk]...)}]