TMF Reference Manual (G06.26+)

TMFCOM Commands

HP NonStop TMF Reference Manual—522418-003

3-61

ALTER AUDITTRAIL

RESET COMMITHOLDMODE

resets the COMMITHOLDMODE attribute to the originally assigned default, which

is unconfigured. This default produces the same TMF behavior as

COMMITHOLDMODE OFF. When specified for the master audit trail, RESET

COMMITHOLDMODE also resets the COMMITHOLDTIMER timeout value and

ON TIMEOUT action (described next) to their originally assigned defaults. When

specified for an auxiliary audit trail, RESET COMMITHOLDMODE retains the

present COMMITHOLDTIMER timeout and ON TIMEOUT action.

You cannot reset COMMITHOLDMODE for the master audit trail until you reset

COMMITHOLDMODE for all auxiliary audit trails.

If you specify RESET COMMITHOLDMODE, the INFO AUDITTRAIL, INFO TMF,

STATUS AUDITTRAIL, and STATUS TMF commands display no information for

the commit-hold attributes.

COMMITHOLDTIMER {timeout [ON TIMEOUT {SUSPEND | CRASH}] | -1}

specifies how long TMF stays in the commit-hold condition if the components

needed to ensure ZLT remain unavailable. This period is known as the timeout

duration.

You can only specify the COMMITHOLDTIMER setting for the master audit trail.

The timeout value and ON TIMEOUT action you specify will automatically apply

across the entire TMF system, affecting all audit trails.

•

To indicate a specific timeout duration, use the construct:

COMMITHOLDTIMER timeout [ON TIMEOUT {SUSPEND | CRASH}]

where:

Note. This option is only available on systems running the HP NonStop™ Remote

Database Facility (RDF) subsystem that guarantees Zero Lost Transactions (RDF/ZLT).

This option is enabled when RDF/ZLT is installed; if RDF/ZLT is present on your system

and this option is not presently enabled, please contact the Global Customer Support

Center (GCSC).

For more information, see COMMITHOLDMODE and COMMITHOLDTIMER Option