TMF Supplement for Large Audit Files (G06.24+)

TMF Reference Manual
HP NonStop TMF Supplement for Large Audit-Trail Files—527391-001
5-25
INFO AUDITTRAIL (Pages 3-152 through 3-155)
INFO AUDITTRAIL
(Pages 3-152 through 3-155)
The INFO AUDITTRAIL command displays the configured attribute values of audit
trails.
MASTER | MAT
AUX[ILIARY]nn
identifies the audit trail for which attributes are to be displayed. MASTER or MAT
specifies the master audit trail. AUXILIARYnn or AUXnn specifies an auxiliary
audit trail. nn is a two-digit number ranging from 01 through 15 that specifies one
of the 15 potential auxiliary audit trails in the configuration. (When the value of nn
is 09 or less, you must specify the leading zero.)
*
displays information for all audit trails. If you do not specify an audit trail, this is the
default.
OBEYFORM
formats INFO AUDITTRAIL output as command file text that can be executed by
TMFCOM. TMF saves this output in the file designated by the OUT option
available with all commands. Subsequently executing this command file produces
a new audit-trail configuration that exactly matches the existing configuration. OUT
option use and command file execution are described in “Directing Output to an
Alternate Destination” on page 2-8 of the TMF Reference Manual.
Security Restrictions
Anyone can enter the INFO AUDITTRAIL command.
INFO AUDITTRAIL [MASTER | MAT ]
[AUX[ILIARY]nn ]
[(MASTER | MAT [,AUX[ILIARY]nn ])]
[(AUX[ILIARY]nn [,MASTER | MAT ])]
[(AUX[ILIARY]nn [,AUX[ILIARY]nn])]
[ * ]
[,OBEYFORM]
Note. When you specify OBEYFORM, TMF does not write the MaxRetainedATFiles field
to the INFO AUDITTRAIL output because this value is only used temporarily during
volume or file recovery.