TN3270 Server Manual

TN32COM Error Messages
TN3270 Server Manual—424097-001
C-2
Error Messages
4
Cause. The RECSIZE value exceeded the maximum size for trace records of 4095
bytes.
Effect. The trace process was not started.
Recovery. Reenter the command, specifying a record size from 1 through 4,095,
inclusive.
5
Cause. The subdevice identifier was invalid.
Effect. The command did not execute.
Recovery. Reenter the command, specifying a valid window name. A valid identifier
begins with a pound (#) sign and is followed by one to seven alphabetic or numeric
characters. The character following the # must be alphabetic.
6
Cause. Extraneous tokens were found following the command.
Effect. The command did not execute.
Recovery. Review the command input, remove any extraneous characters, and then
reenter the command.
7
Cause. A Guardian TN3270 Server process was not opened before you issued a
command.
Effect. The command did not execute.
Recovery. Start the TN32SERV process, then reenter this command.
RECSIZE must be <= 4095
Illegal subdevice
End of command expected
No PROCESS currently open