TN3270 Server Manual

Guardian TN3270 Server Messages
TN3270 Server Manual—424097-001
D-8
The Guardian TN3270 Server stops or abends for other errors. If the Guardian TN3270
Server had been running as a NonStop process pair, the backup process automatically
assumes the primary process role and attempts to maintain the socket with TCP/IP.
Monitor the Guardian TN3270 Server to see if the socket is functioning properly with
TCP/IP. If the socket is not functioning properly, restart the TCP/IP process.
14
err
is the error returned by the GETHOSTBYADDR function.
Cause. The Guardian TN3270 Server encountered an error trying to resolve a host
name by a Domain Name Resolver configured in the RESCONF file. (The RESCONF
file is used by the Domain Name Resolver to configure the Domain Name Server
component of the Transmission Control Protocol/Internet Protocol (TCP/IP)).
Effect. The Guardian TN3270 Server does not report the client’s host name in Event
Management Service (EMS) errors.
Recovery. Reestablish communications with the Domain Name Resolver.
15
coll
is the name of the Event Management Service (EMS) collector to which logging
was switched.
Cause. The logging changed to the specified EMS collector due to an operator
command or an error on a previous log file.
Effect. EMS events are written to a new EMS collector.
Recovery. Informational message only; no corrective action is needed.
16
process-name
is the Guardian TN3270 Server process.
GETHOSTBYADDR error err
Logging switch to: coll
Primary Process Established: Process Name = process-name