TN3270 Server Manual

ITI Communication Protocol
TN3270 Server Manual—424097-001
6-14
Applicable File System Procedures (SNAX/XF
Mode)
Applicable File System Procedures (SNAX/XF
Mode)
You can configure the Guardian TN3270 Server process to emulate the SNAX/XF
application interface by specifying the -s switch on the command line. The Guardian
TN3270 Server runs in AM3270 mode by default.
The following file system procedures are recognized by the Guardian TN3270 Server
when it is operating in SNAX/XF mode:
All file system procedures are documented in the Guardian Procedure Calls Reference
Manual. A subset of these file system procedures—those with special significance in the
ITI protocol—is described next.
•
CONTROL 11 and 12 operations
•
READ[x] procedure
•
SETMODE functions 8, 11, 12, and 20 procedures
•
SETMODE function 144 procedure
•
SETPARAM function 3 procedure
•
WRITE[x] procedure
•
WRITEREAD[x] procedure
AWAITIO CONTROL OPEN SETPARAM
CANCEL DEVICEINFO READ[x] WRITE[x]
CLOSE FILEINFO SETMODE WRITEREAD[x]