TN3270 Server Manual

ITI Communication Protocol

TN3270 Server Manual—424097-001

6-17

SETMODE Function Procedures

The SETMODE function procedures are used to set specified terminal characteristics for

the ITI protocol. The function parameter can have the value of 8, 11, 12, or 20. Uses

for parameter-1 and parameter-2 vary, depending on the value of function.

function

INT:value

parameter-1

INT:value

parameter-2

INT:value

parameter-1

INT:value

CALL SETMODE (function [, parameter-1 ] [, parameter-2 ])

6 (set spring control) is not supported.

7 (set auto line feed) is not supported.

8 sets the transfer mode:

0 conversational mode (default).

1 block mode.

11 sets the ownership of BREAK:

0 disable BREAK (default).

1 enable BREAK.

0 normal mode: any type file access is permitted (default).

1 BREAK mode: only BREAK-type file access is permitted.

12 sets the terminal access mode and the file access type:

0 normal mode: any type file access is permitted (default).

1 BREAK mode: only BREAK-type access is permitted.