TN3270e Server Manual

ETN32COM Error Messages
TN3270e Server Manual—422923-003
C-2
Error Messages
4
Cause. The RECSIZE value exceeded the maximum size for trace records of 4095
bytes.
Effect. The trace process was not started.
Recovery. Reenter the command, specifying a record size from 1 through 4,095,
inclusive.
5
Cause. The subdevice identifier was invalid.
Effect. The command did not execute.
Recovery. Reenter the command, specifying a valid window name. A valid identifier
begins with a pound (#) sign and is followed by one to seven alphabetic or numeric
characters. The character following the # must be alphabetic.
6
Cause. Extraneous tokens were found following the command.
Effect. The command did not execute.
Recovery. Review the command input, remove any extraneous characters, and then
reenter the command.
7
Cause. A TN3270e server process was not opened before you issued a command.
Effect. The command did not execute.
Recovery. Start the ETN32SRV process, then reenter this command.
RECSIZE must be <= 4095
Illegal subdevice
End of command expected
No PROCESS currently open