TN3270e Server Manual

TN3270e Server Messages
TN3270e Server Manual—422923-003
D-9
Cause. The TN3270e server encountered an input/output (I/O) error on the socket
used to monitor network connections requests.
Effect. The socket to the TCP/IP process is closed and reopened.
Recovery. The TN3270e server continues to try to reestablish the socket with TCP/IP
for errors 14, 66, and 201. Monitor the TN3270e server to see if the socket can be
restored. If the TN3270e server cannot automatically restore the socket, restart the
TCP/IP process.
The TN3270e server stops or abends for other errors. If the TN3270e server had been
running as a NonStop process pair, the backup process automatically assumes the
primary process role and attempts to maintain the socket with TCP/IP. Monitor the
TN3270e server to see if the socket is functioning properly with TCP/IP. If the socket is
not functioning properly, restart the TCP/IP process.
14
err
is the error returned by the GETHOSTBYADDR function.
Cause. The TN3270e server encountered an error trying to resolve a host name by a
Domain Name Resolver configured in the RESCONF file. (The RESCONF file is used
by the Domain Name Resolver to configure the Domain Name Server component of
the Transmission Control Protocol/Internet Protocol (TCP/IP)).
Effect. The TN3270e server does not report the client’s host name in Event
Management Service (EMS) errors.
Recovery. Reestablish communications with the Domain Name Resolver.
15
coll
is the name of the Event Management Service (EMS) collector to which logging
was switched.
Cause. The logging changed to the specified EMS collector due to an operator
command or an error on a previous log file.
Effect. EMS events are written to a new EMS collector.
Recovery. Informational message only; no corrective action is needed.
GETHOSTBYADDR error err
Logging switch to: coll