TN3270e Server Manual

Using ETN32COM

TN3270e Server Manual—422923-003

4-19

STATUS PROCESS

This command displays the status of the TN3270e server process.

Example

~STATUS PROCESS

Number of windows: 3

Logfile: \CSO.$0

Trace file:

Process mode: AM3270

Non-stop specified: YES

Non-stop Active: YES

National Language Support Translation is ENABLED

--- Memory pool usage ---

Current Pct Maximum Pct

--------- --- --------- ---

Configured: (1) 001044480

High: (2) 000000532 (3) 000 (4) 000004240 (5) 000

Allocated: (6) 000000066 (7) 000 (8) 000001029 (9) 000

Count: (10) 00002 (11) 00008

Fragments: (12) 00002 (13) 00004

Fail size: (14) 00000

TCP/IP process: \CSO.$ZTC0

Host name: CSO.TANDEM.COM

Port: 2002

Number of sessions: 0

State: ACCEPT (15)

Memory pool usage shows statistics from the memory pool.

(1) current configured

is the size of the memory pool in bytes. This value is determined by the -m

parameter on the command line.

(2) current high

is the current high water mark in the buffer pool, expressed in bytes. The

percent high (3) value is the percentage of current configured (1). When

compared with current allocated (6), current high (2) indicates the amount of

memory not used due to pool fragmentation.

(4) maximum high

is the maximum high water mark in the buffer pool, expressed in bytes. Percent

high (5) is the percentage of current configured (1). When compared with

maximum allocated (8), maximum high (4) indicates the largest amount of

memory wasted due to fragmentation.

STATUS PROCESS