TN3270e Server Manual

ITI Communication Protocol
TN3270e Server Manual—422923-003
6-4
Applicable File System Procedures (SNAX/XF
Mode)
Applicable File System Procedures (SNAX/XF
Mode)
You can configure the TN3270e server process to emulate the SNAX/XF application
interface by specifying the -s switch on the command line. The TN3270e server runs in
AM3270 mode by default.
The following file system procedures are recognized by the TN3270e server when it is
operating in SNAX/XF mode:
All file system procedures are documented in the Guardian Procedure Calls Reference
Manual. A subset of these file system procedures—those with special significance in
the ITI protocol—is described next.

CONTROL Operations (See page 6-5)

READ[x] Procedure (See page 6-6)

SETMODE Function Procedures (See page 6-7)

SETMODE function 144 Procedure (See page 6-9)

SETPARAM Function 3 Procedure (See page 6-11)

WRITE [x] Procedure (See page 6-14)

WRITEREAD [x] Procedure (See page 6-15)
AWAITIO CONTROL OPEN SETPARAM
CANCEL DEVICEINFO READ[x] WRITE[x]
CLOSE FILEINFO SETMODE WRITEREAD[x]